Emerson CR276BE - Page 9

8
OPERATION (CONTINUED)
Install the leveling foot and the bottom hinge bracket on the new bottom side. Then tighten the
screws of the bottom hinge bracket.
3
Slot the appliance door into the bottom hinge pin. Replace the upper hinge bracket on the new
sideandcheckthettingbetweenthedoor/hingemovingsmoothly.Thentightenthescrews
of the upper hinge bracket. Replace the hinge cover and the right side screw covers.
4
5
Checkthatthedoorisalignedhorizontallyandverticallyandthatthesealsareclosedonall
sidesbeforenallytighteningtheupperhinge.Re-adjustthelevelingfeet.