Emerson CR276BE - Reversing the Door Position

OPERATION (CONTINUED)
REVERSING THE DOOR POSITION
CAUTION:
To avoid to injury yourself and/or property, we recommend someone assist you during the door
reversal process.
Remove the upper hinge cover, then unscrew the upper screws of metal hinge bracket and
take off the hinge. Then take off the left side screw covers. Pull the appliance door upward
to take it off.
NOTE:
To take the door off it is necessary to tilt the
Appliance backward. You should rest the
Appliance on something solid, e.g. a chair just
below the top panel.
DO NOT lay theAppliance completely at as
this may damage the coolant system.
• EnsuretheApplianceisunpluggedandempty.
• Adjust the two leveling feet to their highest
position.
• Werecommendyouhavesomeonetoassist
you.
TOOLS REQUIRED
1
2
7
Remove left leveling foot and the bottom hinge bracket by unscrewing the mounting
screws.
3. Machine Screw
 4.BottomHingeBracket
•8mm&10mmsocketscrewdriver
•Phillipsstylescrewdriver
1.UpperHingeBracket
2. Leveling foot