Emerson Dixell iChill IC200D EVO Series - Page 30

1592015610 User manual IC200D EVO GB rel1.0 10.11.2015_rev10 IC200D 30/192
o Active: the alarm is still active and it is not possible to reset it
o Reset: the alarm is not active and it is possible to reset it
Manual reset procedure:
o press or to select the alarm;
o press to reset the alarm
In case of compressor overload alarm when the password is requested, follow this step:
o press o to select the compressor overload alarm
o press
o press
o press or to insert the password value (parameter AL46)
o press to confirm the operation
10.6 MENU SERVICE
Pressing it is possible to read the following information:
Parameter programming
Programming clock
Energy saving and ON/OFF scheduling
Compressor maintenance
It is possible to disable the compressor for maintenance,
read the working hours and number of start up (and reset
them)
Water pump maintenance
It is possible to read / reset the working hours
Circuit maintenance
Visualization and reset of the alarms
Visualization and reset of the alarm log
Defrost status
Valves status
I/O status