1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 102/205
6.8.15 Discharge compressor temperature
If CO09 = 0/1, discharge compressor icon is shown as picture below.
In this screen, if the probe: compressor 1…16 PTC discharge temperature probe (AI type=1 to 16) is
configured, its value will be displayed.
Press the button can exit current screen.
6.8.16 Domestic hot water (Sanitary water)
If AH01 = 0 (Auxiliary heating is disabled), the icon for domestic hot water is shown as picture below.
In sanitary water screen, relevant probes value and output status will display.
To Next Page
Loading...
