1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 117/205
7.4 HOW TO USE WIZMATE
7.4.1 Scan For Device
Enter in “Network” menu, set “Start IP” and “Stop IP” according to your Ipro IP address.
Press button , if the device is connected, it will display in the list.
7.4.2 Read Parameters Value
Enter in menu “Map”, press button , the parameters value will be read out from the ipro controller and
display.
To Next Page
Loading...
