1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 119/205
7.4.3 Change Parameters Value
If some parameters’ value need to be changed, input the new values in “Value” cell.
Then press button to download new parameters’ value into the controller.
Or user can right click on the table, in the pop-out menu, click on “Send Changed parameters”.
7.4.4 Save/Open Map
Press button to save the map. All of the currently parameters value will be wrote into a .bin file which
can be open and used in the future.
To Next Page
Loading...
