1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 13/205
5. USER INTERFACE VISOGRAPH 1.0 AND VISOGRAPH 2.0
Using the VISOGRAPH LCD graphic keyboard, it is possible to monitor and modify the status of the unit.
User can select UI type via configuring parameter DP12 in Wizmate with administrator authority. The options
are: VISOGRAPH 1.0, VISOGRAPH 2.0 and VISOTOUCH.
VISOGRAPH 1.0 and VISOGRAPH 2.0 are different in hardware and firmware, but they are showing the
same screens. The only difference is VISOGRAPH 2.0 can manage also two LEDs on the front panel in
addition.
Green LED: Always ON after power on.
Red LED: ON when have alarm active or resettable.
Main screen
Display
Unit status
Time and date
Probes value
Equipments status
Display
Probes value of all
configured circuits
Display
Set point
Display
Current alarms
Display
Equipments status in all circuits
Compressor
Water pump
Fan
Parameters Programming
Time/Time periods
Compressors Water pump (Supply fan) Alarms Historical alarms
Defrost
Heaters/Liquid line
solenoid valve
I/O status
Thermostatic Valve
Heat recovery Auxiliary outputs
Free-cooling
Screw compressor
Discharge comp. temp.
Domestic hot water
Auxiliary heating
Control panel
To Next Page
Loading...
