1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 17/205
When unit is ON in chiller mode, the status in the screen is “Cool Mode”:
When unit is ON in heat pump mode, the status in the screen is “Heat Mode”:
SWITCH THE UNIT ON/OFF IN COOLING MODE FROM THE KEYBOARD
The configuration should be:
CF04 = 0, (not Motor condensing unit)
CF02 = 1, (chiller only)
SP09 = 0, (from the keyboard)
In the keyboard, key 3 is always visible and key 6 is hidden. Key 3 will be shown as when SP08 = 0
and shown as when SP08 = 1.
Press key 3 can switch the device status between cooling mode and stand-by.
SWITCH THE UNIT ON/OFF IN HEATING MODE FROM THE KEYBOARD
The configuration should be:
CF04 = 0, (not Motor condensing unit)
CF02 = 2, (heat pump only)
SP09 = 0, (from the keyboard)
In the keyboard, key 6 is always visible and key 3 is hidden. Key 6 will be shown as when SP08 = 0
and shown as when SP08 = 1.
Press key 3 can switch the device status between heating mode and stand-by.
To Next Page
Loading...
