Emerson Dixell iProChill IPC115D - Alarm Key in Main Screen

1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 26/205
Press the ESC key several times to go back to the main screen.
5.7 ALARM KEY IN MAIN SCREEN
When an alarm occurs, the display shows the flashing icon and the buzzer starts to operate.
Press any key to silence the buzzer.
Moreover, the alarms key starts to flash alternately with the icons / ;
By pressing the key, pass to the alarms in progress screen:
Three types of alarms can be present:
 Resettable  in this case, the alarm is not active and can be reset. Position the cursor on the alarm
element and press RESET.
 Password  in this case, the alarm is not active, but a password is required to reset it.
 Active  the alarm is still in progress.
If there are several resettable alarms, instead of selecting them one by one, press RST ALL and they will all
be reset together.
To reset an alarm that is protected by a password, operate as follows:
 Select the alarm marked by "Password".
 Press RESET.