1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 29/205
5.8 CIRC KEY IN MAIN SCREEN
Using the CIRC key in the main screen it is possible to monitor the situation of the unit. The information
refers to:
Circuits compressors status; the screen shows the compressors present for each circuit and the
activation status of the compressor (number of unloaders active). If the compressor has no number
on the right, it means that it is at full power.
In the screen below, circuit 1 has 2 compressors configured. Compressor 1 running at full power,
compressor 2 running at 1
st
power step. circuit 2 has 1 compressors configured and it is not working
now.
If unloading should be active, the maximum step number for unloading will be displayed.
Condensation-evaporation probes. The screen shows the condensation and evaporation pressures
of every circuit present.
To Next Page
Loading...
