1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 38/205
For each individual compressor it is possible:
To reset the working hours
Reset the number of start-ups
Disable compressor working (e.g. perform maintenance)
To reset the values, position the cursor on the element and press the RESET HOURS or RESET STARTS
key:
The cursor will automatically position itself on the next element, to modify it repeat the operation just
described.
To enable or disable a compressor, position the cursor on the element and press the ENB/DIS key:
The cursor will automatically position itself on the next element, to modify it repeat the operation just
described.
To Next Page
Loading...
