1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 54/205
The sanitary water set point is editable.
Press key for 1 second can enable/disable the sanitary water function.
The sanitary water function status can be:
DIS disabled by parameter setting
Dis by key disabled by keyboard
Not requested not needed
Doing dF defrost in progress
Changing state requested but not start yet, in inversion valve changing phase.
ON activated
In Antilegionella cycle screen, relevant probes value, status and count down time will display.
The Antilegionella set point and the activate time is editable.
The antilegionella function status can be:
DIS disabled by parameter setting
Not active deactive
Running active
In Solar panel screen, relevant probes value and output status will display.
The Solar panel set point is editable.
The solar panel working status can be:
Not active
Active
To Next Page
Loading...
