1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx iProCHILL 87/205
For each individual compressor it is possible:
To reset the working hours
Reset the number of start-ups
Disable compressor working (e.g. inorder to perform maintenance)
To reset the values, click on the compressor name label, and press the or button. And the
password is request for reset operation (password is set by Par. AL31).
To enable or disable a compressor, click on the compressor name label, and then press the button.
6.8.4 Water pump
When CF01=0 (Air/air unit), instead of pump icon, the fan icon will display in the same position.
To Next Page
Loading...
