34
Timer recording
Recording
You can program the unit to record
up to 8 programs, up to a year in
advance. Daily or weekly program
recordings are also available.
• Be sure to set the clock before
making a timer programming.
• Insert a recordable disc or a
tape with a safety tab.
1
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
2
Select SETUP using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
3
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
4
Select “Timer Programming”
using K / L buttons, then
press ENTER button.
Timer Programming list will
appear.
5
Select the program which is
not set up using K / L but-
tons, then press ENTER but-
ton.
6
Enter the date using K / L
buttons, then press B button.
e.g. January 1st
7
Enter the time to start and
to end using K / L buttons,
then press B button.
Note
• If you have not set the
clock yet:
A clock setting window will
appear after step 4. Continue
with the step 4 in “Auto
Clock Setting” on page 21 or
“Manual Clock Setting” on
page 22 before making a
timer programming.
•Press { or B buttons to
move the cursor to the left
and the right in the timer
programming menu.
1
2
3
4
5
You can choose the timer
programming menu by press-
ing TIMER PROG. button. In
this case, continue with step 5.
7
6
When pressing L button at the
current date, timer recording
mode will change as follows.
To Next Page
Loading...
