Emerson FB2200 - Section 2: Installation; Hazardous Locations; Environmental Specifications

Emerson FB2200 Flow Computer Instruction Manual
D301784X012
March 2019
Installation 13
Section 2: Installation
This section covers the following topics:
▪
Hazardous Locations
▪
Environmental Specifications
▪
Required Tools
▪
Site Considerations
▪
General Wiring Guidelines
▪
Grounding
▪
Opening/Closing the Enclosure
▪
Mounting the Enclosure
▪
Power Modes
▪
Connecting Power
▪
Installing the Optional 30W Solar Panel
▪
Adjusting the Optional Solar Panel
▪
Connecting Communications Ports
▪
Door Contact Terminal
The flow computer ships from the factory fully assembled, except for the optional solar panel
assembly.
2.1 Hazardous Locations
For North America the FB2200 has certifications for Class I Division 2 (Groups A, B, C, & D) non-
incendive, and non-hazardous locations only. Appendix A contains special information for Class I
Division 2 installations.
For other world areas the FB2200 has ATEX and IEC Ex certifications for Ex nA Zone 2 non-sparking
installations and non-hazardous locations only. See Appendix B for more information.
All certifications are listed on the data plate located on the top of the device.
2.2 Environmental Specifications
This section summarizes the environmental specifications for the device. For full details, refer to
the product data sheet FB2200 Flow Computer (D301792X012).