Need help?Do you have a question about the Emerson FloBoss S600 and is the answer not in the manual?
Outlines the manual's contents, purpose, and scope.
Describes the FloBoss S600 flow computer, its applications, and features.
Details the software used for configuring the S600, including its versions.
Lists related technical specification documents for the S600 and software.
Discusses prerequisites and considerations before installing the S600 unit.
Details environmental factors to consider for safe and effective S600 installation.
Lists the specific tools needed for the S600 installation process.
Step-by-step guide for physically installing the S600 unit.
Instructions for installing and removing plug-in boards for maintenance or upgrades.
Details the P152 CPU board, its functions, and wiring recommendations.
Information on power connections, voltage, and current requirements for the S600.
Describes the various serial and Ethernet communication ports on the CPU board.
Lists and describes miscellaneous device connectors on the P152 CPU module.
Details the function and default settings of bit links (jumpers) on the CPU board.
Information regarding the optional second Ethernet port for high-speed communication.
Details the P144 I/O board, its capabilities, and connector terminations.
Information on the P154 prover interface card for dedicated prover applications.
Describes the P188 HART I/O board for Highway Addressable Remote Transducer communications.
Overview of the S600 front panel as a local interface for parameter review and modification.
Describes the front panel port used for Config600 software file transfers.
Explains the layout, color-coding, and function of the front panel keypad.
Details the alarm indicator LED and associated control keys (VIEW, ACCEPT).
Describes the LCD display, information presentation, and status/ID line.
Guide to navigating the S600's main menu and display screens.
Procedures for changing values, calculation modes, and entering data via the front panel.
How to configure specific content access based on security levels for webserver.
Steps to connect to the S600 over TCP/IP using a web browser.
How to use the web browser interface, menu bar, and hierarchy tree.
Basic procedure for powering up and initiating the S600 startup sequence.
Describes a warm start that preserves configuration memory and current values.
Details a cold start that reloads configurations from Flash memory, often used after updates.
Explains the options available in the S600's startup menu for system initialization.
Lists and provides resolutions for various messages displayed during S600 startup.
General advice and steps to follow when diagnosing and troubleshooting S600 problems.
Provides checkpoints for frequent issues like power, startup, front panel, and I/O problems.
Step-by-step procedures for common troubleshooting tasks such as reflashing firmware and clearing SRAM.
To Next Page
General