Emerson Fisher 3583 - User Manual

www.Fisher.com
Fisherr 3582 and 3582i Positioners, 582i
Electro‐Pneumatic Converter, and 3583 Valve
Stem Position Transmitter
Contents
Introduction 2.................................
Scope of Manual 2.............................
Description 2.................................
Type Number Descriptions 6................
Specifications 6...............................
Educational Services 7.........................
Installation 7..................................
Hazardous Area Classifications and Special
Instructions for “Safe Use” and Installation
in Hazardous Areas for 582i Converter 8........
CSA 9....................................
FM 9.....................................
ATEX 10..................................
IECEx 12..................................
Mounting 13.................................
Changing Cam Position 18......................
Pressure Connections 18.......................
Supply Connection 18......................
Output Connection 20......................
Instrument Connection 20..................
Diagnostic Connections 20..................
Vent 21......................................
Electrical Connections for 3582i
Valve Positioner 21..........................
582i Converter Installation 23...................
Operating Information 24........................
Valve Positioner Cam Information 24.............
Valve Stem Position Transmitter Cam
Information 26.............................
(continued on page 2)
Figure 1. Typical Mounting for Fisher 3582 and 3582i Positioners and 3583 Transmitters
CONTROL VALVE WITH
3582i POSITIONER
CONTROL VALVE WITH
3583 TRANSMITTER
CONTROL VALVE WITH
3582 POSITIONER
W5498‐1
W8424
W5499‐1
Instruction Manual
D200138X012
3582, 582i, and 3583
January 2013

Summary

Product Introduction and Description

Product Overview

Describes the Fisher 3582, 3582i, and 3583 units.

Specifications and Classifications

Hazardous Area Classifications

Details safety classifications for hazardous locations.

Electrical and Housing Specs

Lists electrical and enclosure ratings for the 582i.

Installation and Mounting

Hazardous Area Installation

Special instructions for safe use in hazardous areas.

Mounting Procedures

Operation and Calibration

Calibration Procedures

Steps for beam alignment and calibration.

Principle of Operation

3582 Valve Positioners

3582 i Valve Positioner

3583 Transmitters

Maintenance and Service

General Maintenance Procedures

Safety and general maintenance guidance.

582 i Converter Service

Emerson Fisher 3583 Specifications

General

Supply Pressure	20-100 psi
Material	Aluminum or stainless steel
Action	Direct or reverse
Enclosure Rating	NEMA 4X, IP66
Input Signal	4-20 mA
Temperature Range	-40°F to 180°F (-40°C to 82°C)
Air Consumption	0.1 scfm
Compliance	CE, CSA
Mounting	Direct mounting on linear or rotary actuators