Emerson Fisher 3610J - User Manual

www.Fisher.com
Fisher
™
3610J and 3620J Positioners and 3622
Electro‐Pneumatic Converter
Contents
Introduction 2.................................
Scope of Manual 2.............................
Description 2.................................
Type Number Description 5.....................
Specifications 6...............................
Educational Services 6.........................
Installation 7..................................
Hazardous Area Classifications and
Special Instructions for “Safe Use” and
Installation in Hazardous Locations
for 3622 converter 7........................
CSA 8....................................
FM 8.....................................
ATEX 9...................................
IECEx 10..................................
Mounting 3610J and 3620J Positioners
on 2052 Actuators 11........................
Changing Cams—Actuator Styles A, B,
C, and D 12................................
Mounting 3611JP and 3621JP Positioners
on 585 and 585R Actuators 13................
Mounting 3611JP and 3621JP Positioners
on 585C and 585CR Actuators 15..............
Installing the 3622 Electro‐Pneumatic
Converter 17...............................
Changing Positioner Types 17...................
Pressure Connections 17.......................
Supply Connection 18......................
Output Connections 18.....................
Instrument Connection 19..................
Diagnostic Connections 20..................
Vent Connection 21...........................
Electrical Connections
for 3620J Positioners 22......................
Calibration 22..................................
Minor Loop Gain Adjustment 23.................
Crossover Adjustment 24.......................
3610J or 3620J Positioner,
Spring and Diaphragm Actuators 24........
3610JP, 3611JP, 3620JP, or 3621JP
Positioner, Piston Actuators 25............
Figure 1. Typical Positioners
3610J POSITIONER WITH
2052 ACTUATOR AND V500 VALVE
3620JP POSITIONER WITH
1061 ACTUATOR AND V500 VALVE
W4920-1
X1284
Instruction Manual
D200149X012
3610J and 3620J Positioners
September 2017

Summary

Introduction

Scope of Manual

Description

Specifications

Typical Performance

Presents typical performance specifications like linearity and hysteresis.

Supply Pressure

Hazardous Area Classification

Lists hazardous area classifications and certifications for specific models.

Type Number Description

Installation

Hazardous Area Classifications and Special Instructions for 3622 Converter

Special instructions for safe use and installation in hazardous locations for the 3622 converter.

Supply Connection

Output Connections

Mounting Positioners

Mounting 3610 J and 3620 J Positioners on 2052 Actuators

Step-by-step guide for mounting positioners on 2052 actuators.

Changing Cams-Actuator Styles A, B, C, and D

Mounting 3611 JP and 3621 JP on 585 and 585 R Size 100 Actuators

Instructions for mounting positioners on 585/585R size 100 actuators.

Mounting 3611 JP and 3621 JP on 585 C and 585 CR Size 25 and 50 Actuators

Guide for mounting positioners on 585C/585CR size 25/50 actuators.

Installing the 3622 Electro-Pneumatic Converter

Calibration

Minor Loop Gain Adjustment

Procedure for adjusting the minor loop gain for optimal response.

Crossover Adjustment

Steps for performing the crossover adjustment for different actuator types.

Zero and Span Adjustments

Instructions for setting the zero and span of the positioner.

Changing Positioner Action

Changing to Direct Action

Procedure to change the positioner action to direct.

Changing to Reverse Action

Procedure to change the positioner action to reverse.

Split-Range Operation

Principle of Operation

Maintenance

Positioner Disassembly Procedures

Positioner Reassembly Procedures

Parts Ordering

Emerson Fisher 3610J Specifications

General

Brand	Emerson
Model	Fisher 3610J
Category	Valve Positioners
Language	English