Instruction Manual
D103302X012
A81 Valve
January 2011
15
Assembly
WARNING
Do not lubricate bearings that will be used for oxygen service, or where the lubrication is incompatible with the process
media. Any
use of lubricant can lead to the sudden explosion of media due to the oil/oxygen mixture, causing personal
injury or property damage.
CAUTION
To avoid possible product damage, ensure the bearing tabs are oriented correctly when installing in the following
procedure. See figure 5 for proper orientation of the bearings.
Figure 6. Taper / Expansion Pin Installation
TAPER/EXPANSION PIN LOCATION
INSTALL THE PINS FROM THIS SIDE OF THE DISK.
1
“T” STAMPED ON ACTUATOR
END OF DISK
W9487
1
To Next Page
Loading...
