Instruction Manual
D104485X012
Vonk Choke Valves
September 2019
13
YCV Valve, STD/FE (figure 15)
Key Description
10 Body
20.10 Bean
20.20 Front Disk
20.30 Seal, Bean
20.40 Locking Wire
20.50 Guide Strip
20.60 Scraper
20.70 Turning Fork
20.80 Protecting Bush
20.90 V-Ring
30.10 Bonnet
30.20 O-Ring, qty 2
30.30 Seal
30.40 Guide Strip, qty 2
30.50 Spring
30.60 Bearing
30.70 Shaft
30.80 Radial Bearing, qty 2
30.90 Scraper
30.100 Wedge
30.110 Pin
30.120 Bonnet Bush
30.130 O-Ring, qty 2
30.140 Spring Sleeve
40.10 Stud Bolt, qty 6
Nut, qty 6
40.30 Nameplate
40.40 Rivets, qty 2
YCV Valve, STD/FE/FS (figure 16)
Key Description
10 Body
20.10 Bean
20.20 Front Disk
20.30 Seal, Bean
20.40 Locking Wire
20.50 Guide Strip
20.60 Scraper
20.70 Turning Fork
20.80 Protecting Bush
20.90 V-Ring
30.10 Bonnet
30.20 O-Ring, qty 2
30.30 Seal
30.40 Guide Strip, qty 2
30.50 Spring
30.60 Bearing
30.70 Shaft
30.80 Radical Bearing, qty 2
30.90 Scraper
30.100 Wedge
30.110 Pin
30.120 Bonnet Bush
30.130 O-Ring, qty 2
30.140 Spring Sleeve
30.150 Gland
30.160 Stem Packing, qty 3
30.170 Body Packing
30.180 Hex Screw, qty 6
40.10 Stud Bolt, qty 4
Nut, qty 4
Key Description
40.30 Nameplate
40.40 Rivets, qty 2
40.50 Bean Packing
YCV Valve, LT/FE (figure 17)
Key Description
10 Body
20.10 Bean
20.20 Front Disk
20.30 Seal, Bean
20.40 Locking Wire
20.50 Bearing
20.60 Turning Fork
20.70 Protecting Bush
20.80 V-Ring
20.90 Dowel Pin
30.10 Bonnet
30.20 Seal
30.30 Seal
30.40 Bearing
30.50 Spring
30.60 Bearing
30.70 Shaft
30.80 Bearing
30.90 Scraper
30.100 Shaft Key
30.110 Pin
30.120 Bushing Holder
30.130 Spring Bush
40.10 Stud Bolt, qty 4
Nut, qty 4
40.30 Nameplate
40.40 Rivets, qty 2
YCV Valve, HT (figure 18)
Key Description
10 Body
20.10 Bean
20.20 Front Disk
20.30 Seal, Bean
20.40 Locking Wire
20.50 Bearing
20.60 Turning Fork
20.70 Protecting Bush
20.80 V-Ring
20.90 Dowel Pin
30.10 Bonnet
30.20 Seal
30.30 Seal
30.40 Bearing
30.50 Spring
30.60 Bearing
30.70 Shaft
30.80 Radial Bearing
30.90 Protecting Ring
30.100 Shaft Key
30.110 Dowel Pin
30.120 O-Ring
30.130 Bearing Holder
40.10 Stud Bolt, qty 4
Nut, qty 4
40.30 Nameplate
40.40 Rivets, qty 2