Emerson Fisher Vonk CHV - Page 18

Instruction Manual
D104485X012
Vonk Choke Valves
September 2019
14
ICV Valve, STD (figure 19)
Key Description
10.10 Inlet Flange
10.20 Outlet Flange
20.10 O-Ring
20.20 O-Ring, qty 3
20.30 Back Disk
20.40 Rotating Shaft
20.45 Back-up Ring, qty 2
20.50 Spring
20.60 O-Ring, qty 4
20.70 Bearing
20.80 Front Disk
20.90 Spring Bush
30.10 Wedge
30.20 Stud Bolt, qty 6
Nut, qty 6
30.40 Nameplate
30.50 Rivets, qty 4
30.60 Protecting Ring
30.70 Grease Cap
30.80 Outlet Nameplate
ICV Valve, LT (figure 20)
Key Description
10.10 Inlet Flange
10.20 Outlet Flange
20.10 V-Seal
20.20 Rotating Shaft
20.40 Locking Wire
20.50 Pin
20.90 Spring Bush
20.100 Spring
20.110 Guide Bearing, qty 2
20.120 Seal, qty 2
20.130 O-Ring
20.140 Front Disk
20.170 Bean
20.180 Rotating Shaft
30.10 Wedge
30.20 Stud Bolt, qty 6
Nut, qty 6
30.40 Nameplate
30.50 Rivets, qty 4
30.60 Protecting Ring
30.70 Outlet Nameplate
ICV Valve, HT (figure 21)
Key Description
1 Inlet Flange
2 Outlet Flange
6 Seal
7 Seal
9 Bean
11 Pin
12 Handle Part, Rotating Shaft
13 Front Disk, Rotating Shaft
14 Spring Bush
15 Spring
16 Guide Bearing, qty 2
17 Seal, qty 2
18 O-Ring
19 Front Disk
20 Locking Wire, Rotating Shaft
22 Wedge
23 Stud Bolt, qty 6
24 Nut, qty 6
26 Nameplate
27 Rivets, qty 4
28 Protecting Ring
30 Outlet Nameplate
40 Rotating Shaft, Handle
41 Nut, qty 3
42 Fork, qty 2
43 Set-Screw, qty 2
44 Set-Screw
45 Eye-Bolt, Right
46 Eye-Bolt, Left
47 Nut
48 Shaft
49 Actuator Handle
50 Washer
51 Bolt
55 Mounting Plate
56 Pin
57 Retaining Ring
58 Bearing Ring
59 Coupling Shaft
60 Bolt, qty 2
61 Washer, qty 2
62 Bolt, qty 4
63 Washer, qty 4