Need help?Do you have a question about the Emerson Liebert Intellislot Unity Card and is the answer not in the manual?
General| Brand | Emerson |
|---|---|
| Model | Liebert Intellislot Unity Card |
| Category | Computer Hardware |
| Language | English |
Lists available communication protocols like BACnet IP, Modbus TCP/RTU, SNMP, YDN23.
Details compatibility with various Liebert equipment and supported protocols.
Describes the connection and monitoring of Liebert SN sensors.
Instructions for physical installation of the card into Liebert equipment.
Methods for assigning an IP address to the card (DHCP or Static IP).
Steps to connect the card to a computer via Ethernet for configuration.
Instructions for connecting the card using an RS-485 serial cable.
Guidance on changing default administrator and user credentials for security.
Steps for basic card configuration, including IP/Web communication interface.
Procedures to avoid conflicts when installing more than one card.
Recommendations for securing the Unity card and critical infrastructure equipment.
Steps to enable communication protocols like BACnet, Modbus, SNMP, YDN23.
Process for enabling the Modbus protocol (TCP or RTU).
Steps to enable the BACnet protocol (IP or MSTP).
Steps to enable and configure SNMP settings.
How to download data mapping files for protocols.
Describes the main areas of the web interface: Identification, Status, Tab Menus, Detail.
Explains how to use help text and icons within the web interface.
Details the menus available on the Managed Device tab.
Details the menus available on the Communications tab.
Describes the Sensor tab, visible when sensors are connected.
Details the Sensor tab's summary page layout and options.
Explains the details pane for selected sensors on the summary page.
Instructions for reordering sensor display.
Overview of the Communications tab and its subfolders.
Describes the Active Events folder in the Communications tab.
Describes the Downloads folder for log files.
Introduces the Configuration folder and its subfolders.
Settings for system information like name, location, and temperature units.
Settings for administrator and general user names and passwords.
Network settings including Speed Duplex, Domain Name Suffix, Telnet Server.
Security settings for the web server (HTTP/HTTPS, password protection).
Settings for Emerson® LIFE Technology remote monitoring.
Configuration options for the Emerson Protocol.
Settings for enabling email and text messaging about events.
Overview of available communication protocols.
Configuration settings for BACnet protocol.
Configuration settings for Modbus protocol.
Configuration settings for SNMP protocol.
Configuration for SNMPv3 user accounts.
Settings for SNMPv1 trap targets.
Settings for SNMPv1/v2c access hosts.
Configuration settings for the YDN23 protocol.
Displays system status and events affecting the card.
Provides access to card restart, factory reset, and firmware updates.
Displays active IP network settings for troubleshooting.
Supports updating or reverting card firmware.
Steps to download and install new firmware for the card.
Procedure to revert to a previously stored firmware version.
To Next Page
