35
To Set The ‘OFF’ Time
6.) Press the MODE button on the front
panel repeatedly until the “TIMER OFF”
indicator is flashing in the display.
7.) Press the PROGRAM or MEMORY
button. The Hour digits begin flashing.
8.) Press the SKIP – ( ) / SKIP + ( ) or TUNING / TUNING button to set
the display to the desired turn off hour, AM or PM.
9.) Press the PROGRAM or MEMORY
button. The Minute digits begin flashing.
10.)Press the SKIP – ( ) / SKIP + ( ) or
TUNING / TUNING button to set
the display to the desired turn off minute.
Press PROGRAM or MEMORY button once again to confirm.
11.)After few seconds, the display returns
to correct time.
The TIMER indicator appears in display meaning that the Timer function is
activated.
MS3110_112106.p65 22/11/2006, 11:4835
To Next Page
Loading...
