19
PLAYING PHONO RECORDS
1.) Raise the turntable dust cover.
2.) Release the Tonearm Clamp, and remove the stylus protector.
3.) Press the AUX/PHONO button to select the Phono mode.
4.) Place a record on the turntable, over the central spindle.
5.) Place the 45 rpm adapter over the central spindle when playing
45 rpm records. Set the Speed Selector Switch to 33, 45 or 78 rpm
according to the record you are playing.
6.) Move the tonearm to the beginning of the record, or to the start
of a particular track. Gently lower the Tonearm onto the record to
start playing. Adjust the Volume, Bass Boost,and Equalizer setting
as desired.
7.) The Turntable will stop automatically when the record finishes. To
stop the record before it ends, lift and replace the Tonearm carefully
onto the Tonearm Rest.
NOTE: Do not turn or stop the turntable manually. Moving or jarring
the Turntable without securing the Tonearm clamp could result in damage
to the Tonearm.
MS9923TT_ib_0416.p65 16/4/2002, 14:1719
To Next Page
Loading...
