52 Chapter 5 Use Of Monitoring Module M800D
Figure 1.8 Setting values of battery group
In the screen shown in Figure 4-13, the user can set the battery parameters. For example, in the “Set value” box of
“Very High Temperature Limit”, the user can set the “temperature limit” from “36.00” to “38.00”, and click the button
“set” to make the setting become effective.
Click the submenu of “Battery1”, the following screen pops up:
NetSure 501 A50, NetSure 501 AA0, NetSure 701 A51 19-Inch Subrack Power Supply System User Manual
To Next Page
Loading...
