Emerson PD6870CH - Setting Radio Presets; Recalling Radio Presets

8
OPERATING INSTRUCTIONS (CONTINUED)
Set the VOLUME control ❶ to a
low setting. Press the POWER
button
❷ to turn the unit on.
1
2
1
Press the PROGRAM/MEMORY/
CLOCK SET button
❶. Within 9
seconds, press the MODE/
MEMORY UP button
❷ until the
desired memory number appears
on the display.
2
1
4
Use the CD Skip/Search ( ) ❶
or ( ) ❷ button to select a
station.
1
2
3
Press the FUNCTION button ❶
until tuner (“AM” or “FM” and a
frequency) appears in the display.
Press the BAND button
❷ to the
desired band - FM or AM.
1
2
2
Press the PROGRAM/MEMORY/
CLOCK SET button again to set
the station in the selected
memory.
5
Repeat steps 3 through 5 to
program up to 10 stations in each
band, if desired.
In case the main power supply
is interrupted, the memory
presets will be erased.
35
6
SETTING RADIO PRESETS
This unit can preset 10 AM and 10 FM radio stations for convenient recall.
Follow steps 1 and 2 above.
12
1
Adjust the BASS BOOST button ❶
and VOLUME control ❷ as
desired.
2
1
3
Press the MODE/MEMORY UP
button to select a preset; the
station will automatically be tuned
in.
2
RECALLING RADIO PRESETS