ACCESSORIES AND OTHER ELECTRICAL CHARACTERISTICS: see following page
DETECTOR CHARACTERISTICS
MAX. SWITCHING POWER 3 W
SWITCHING VOLTAGE 10 to 30 V DC
MAX. SWITCHING CURRENT 100 mA
WIRING PNP - NPN (3)
REVERSE POLARITE PROTECTION yes
OVERLOAD PROTECTION yes
SHORT-CIRCUIT PROTECTION yes
VOLTAGE DROP (EN 60947-5-2) < 1,5 volt (I = 50 mA)
< 2,5 volts (I = 100 mA)
MAX. LEAKAGE CURRENT < 50 µA
MAX. ALLOWABLE OVERVOLTAGE 32 VCC max. (100 ms)
SENSITIVITY 2 mTesla (20 Gauss)
RESPONSE TIME 110 µs opening - 220 µs closing
REPEATABILITY < 0,2 mm
WORKING TEMPERATURE - 25°C , + 85°C
HOUSING
PA + FG overmolding
CABLE PUR, resistant to cutting oils (PVC for M12 IP69K version)
DEGREE OF PROTECTION
(CEI 60529) IP67
PROTECTION CLASS class III
SIGNAL INDICATION yellow diode (LED) which lights up during switching
APPROVAL CE - UL and cUL for 2 m and M8 connection
CHOICE OF DETECTOR
Voltage
10 to 30 Volt DC
Connection
PUR lead, 2 or 5 m long,
3 wires 0.14 mm
2
,
stripped ends,
IP67
0,3 m
PUR
lead + 3-pin
plug-in male
connector and Ø M8,
IP67
0,3 m PUR lead + 3-pin
screw-type male
connec tor, Ø M12,
IP67
0,3 m PVC lead + 3-pin
screw-type male
connec tor, Ø M12,
IP69K
2 metres 5 metres
0,3 metre 0,3 metre 0,3 metre
0,3 metre
PNP NPN PNP PNP NPN PNP PNP
weight (g) 22 22 50 7 7 16 25
compatible
cylinders:
STANDARD CATALOGUE NUMBER detector
detector supplied with cable holding clip and adjustment position stop
PEC
(1)
PES 453
PES Ω (453)
CSC - CGT
PNP-FL2-00-U
NPN-FL2-00-U
(3)
PNP-FL5-00 PNP-QDS-M8-U
NPN-QDS-M8-U
(3)
PNP-QDS-M12 PNP-QDS-M12-F
ISOCLAIR (2)
K - P2B - P2L
PES 450 - PES Ω (450)
PCN
(1) Detector allow direct fi tting on "T" cylinder grooves
(2) Need a kit of fi xation, see pages 7 and 8
(3) U.S. market
MAGNETIC POSITION DETECTORS
for "T" grooves
magneto-resistive (MR)
Series
PNP-NPN
Type
3 wires
3
To Next Page
Loading...
Need help?
General
