-Mitsubishi FX PLC Interface ( -MFX )
Communications:
The -MFX Option uses the Mitsubishi FX’s RS422 port to communicate with
the T-60 Series products. For the T-60 this utilizes com port 1 and either
port is available for use in the T-61.
Connections:
In order for the SeriesT-60 and the FX unit to communicate, a specialized
cable is sent with the Eason unit. The pinout for this cable is shown in the
table below for the T-60 and the T-61.
Figure 29
T-60 Series to the Mitsubishi FX
series PLC Communication
Connections
PLC Interface Commands PLC Specific Information
93
To Next Page
Loading...