Need help?Do you have a question about the Emerson FB3000 and is the answer not in the manual?
General| Category | Touch terminals |
|---|---|
| Manufacturer | Emerson |
| Touchscreen | Yes |
| Enclosure | IP65 rated |
| Communication Ports | Ethernet, Serial, USB |
| USB Ports | 4 |
| Operating Temperature | 0°C to 50°C |
| Mounting | VESA Mount |
| Certifications | CE, FCC |
| Serial Ports | 2 x RS-232/485 |
Information on certifications for Class I Division 2 and Ex ec Zone 2 hazardous locations.
Best practices for wiring RTU components using pluggable terminal blocks.
Details on the four distinct ground references within the FB3000 architecture.
Steps for connecting external DC power to the RTU and field devices.
Details on connecting serial, Ethernet, and USB ports on the CPU module.
Methods for communicating with the RTU via SCADA host or laptop.
Step-by-step instructions for safely removing and replacing power modules.
Instructions for safely removing and replacing the CPU logic module.
Procedure for removing and replacing I/O and communication logic modules.
Steps for safely removing and replacing personality modules.
To Next Page
