53
INSERT THE BATTERY
1. Open the bicycle frame by unlocking the safety lever
2. Insert the battery into the battery compartment inside the frame
3 Close the frame (2), lock the safety lever (1) and lock with the key (3)
1
2
3
USE AND MAINTENANCE OF
THE BATTERY CHARGER
Only use the battery charger supplied with the bicycle to avoid damage to the bat-
tery and not to invalidate the guarantee.
• Do not use the battery charger in a totally closed environment, or with explosive
gases and corrosive substances.
• Never shake, beat or agitate the battery charger to avoid damaging it.
• Protect the battery charger from rain and humidity.
• Do not disassemble the battery charger.
• When charging, the charger and battery should be at least 10cm from the wall or
cold air conditioners.
To Next Page
Loading...
