18
INSERT THE BATTERY
CHARGER USE AND
MAINTEINANCE
• Use only the battery charger supplied with the bicycle, in order to
avoid damage to the battery and not to void the warranty.
• Do not use the charger in a totally closed environment, or with explo-
sive gases and corrosive substances in the area.
• Never shake or beat, the charger to avoid damage.
• Protect the charger from rain and humidity.
• Do not disassemble the battery charger.
• While charging, the battery charger and the battery should be at least
10cm from the wall or from air conditioners.
1. Open the bicycle frame by unlocking the safety lever
2. Insert the battery in the special compartment inside the frame
3 close the frame (2), lock the safety lever (1) and lock with the key (3)
1
2
3
To Next Page
Loading...
