Need help?Do you have a question about the EMG ELDRO Ed 80/6 and is the answer not in the manual?
General| Brand | EMG |
|---|---|
| Model | ELDRO Ed 80/6 |
| Category | Outboard Motor |
| Language | English |
Describes the primary and secondary applications of ELDRO® thrusters and adherence to manual procedures.
Prohibits any use not listed in the intended use section and requires manufacturer confirmation for actuator applications.
Emphasizes the need for qualified personnel with specific training, experience, and authorization for safe operation.
Explains how to interpret the thruster's type designation and provides a key for its components.
Illustrates a type plate and lists the information it contains, such as serial number, lifting force, and voltage.
Presents technical characteristics for short lift thrusters in tabular format, detailing lifting force, path, and weight.
Provides detailed dimensional information for various ELDRO® thruster types with diagrams and tables.
Provides dimensional drawings and a table of dimensions for the Ed 12/4 type thruster.
Shows dimensional drawings for Ed 23/5, Ed 23/5.1, Ed 23/5.2, and Ed 23/5.5 types.
Presents dimensional drawings for Ed 30/5, Ed 30/5.1, and Ed 30/5.2 types.
Displays dimensional drawings for Ed 50, Ed 80, and Ed 125 types.
Shows dimensional drawings for Ed 121 to Ed 501 types, including lift markings.
Features dimensional drawings for Ed 350/20, Ed 350/20-X01, and Ed 350/20.2 types.
Provides dimensional drawings for Ed 630/8, Ed 630/9, and Ed 630/10 types.
Explains that ELDRO® thrusters are manufactured in types that can be merged into type groups based on common attributes.
Describes the drive motor, power supply connection via screw terminals, and M25 x 1.5 cable infeed.
Explains how the motor drives the pump to generate hydraulic pressure, moving the piston and lifting rod.
Outlines safety regulations for assembly, emphasizing that only specialists should perform the work.
Details the steps for installing the thruster, including using lifting gear and securing bolts.
Covers safety rules, connections, and diagrams for electrical setup of ELDRO® thrusters.
Explains how to adjust lifting and lowering times using valves, referencing type plate markings.
Provides a table listing common faults, their possible causes, and recommended measures for rectification.
To Next Page
