Emglo E810-4V - Noise Considerations

10
English
• Equipareaofoperationwith
a fire extinguisher.
• Donotoperatemachinewith
missing, broken, or un au tho-
rized parts.
•Neverstandonthe
compressor.
WARNING: RISK OF FALLING
WHAT CAN HAPPEN HOW TO PREVENT IT
• Aportablecompressor
can fall from a table,
workbench or roof
causing damage to the
compressor and could
resultinseriousinjuryor
death to the operator.
• Alwaysoperatecompressor
in a stable secure position
to prevent accidental
movement of the unit.
Never operate compressor
on a roof or other elevated
position. Use additional
air hose to reach high
locations.
WARNING: RISK FROM NOISE
NOISE CONSIDERATIONS
Consult local officials for information regarding acceptable
noise levels in your area. To reduce excessive noise, use
vibration mounts or silencers, relocate the unit or construct total
enclosures or baffle walls. Contact an authorized service center
or call 1-888-88EMGLO (1-888-883-6456) for assistance.
WHAT CAN HAPPEN HOW TO PREVENT IT
 • Undersomeconditions
and duration of use, noise
from this product may
contribute to hearing loss.
 • Always wear properhearing
protection during use.
DANGER: RISK OF INJURY OR PROP ER TY DAMAGE WHEN
TRANSPORTING OR STORING
WHAT CAN HAPPEN HOW TO PREVENT IT
Oil can leak or spill and could
result in fire or breathing hazard,
resulting in serious injury or
death. Oil leaks can damage
carpet, paint or other surfaces in
vehicles or trailers.
Place compressor on protective
mat when transporting to
protect against damage from
leaks. Remove compressor
from vehicle upon arrival at
destination. Always keep
compressor level and never lie
on its side.
The compressor (wheeled dolly
style unit). is too heavy to be
lifted by one person.
Use two people to lift the
compressor. Lift only from
recommended lift points.
Unsecured compressor can
move when being transported
in a vehicle or trailer, causing
personal injury or property
damage.
Place compressor on
flat horizontal surface
when transporting and
secure compressor using
recommended tie-down points
so that it cannot move while
being transported.