To Next PageTo Next Page
Need help?Do you have a question about the EMI WCP/WHP and is the answer not in the manual?
Read all instructions before use and ensure proper grounding and electrical supply.
Guidance on wiring practices, NEC compliance, and specific connection points for power and low voltage.
Operation of heat pump units with 2-stage heating using electric heat, including setpoint adjustments.
How the cooling system operates, including anti-short cycle timer and setpoint adjustments.
Read instructions thoroughly, keep manual for reference, and understand manufacturer liability.
Explanation of dipswitch functions for matching the unit to different condenser types (cooling only or heat pump).
Instructions for operating the unit in cooling mode, including setpoint adjustments and compressor delays.
How electric heat operates, including setpoint adjustments and the automatic limit switch.
Checks to ensure the unit filter is in place, lines are not contacting, and the unit is securely and levelly mounted.
How to operate the unit with optional electric heat in heat mode, including setpoint adjustments.
Operation of heat pump units with 2-stage heating, including compressor and electric heat engagement.
Instructions for mounting the unit flush against a wall or within a wall box, ensuring levelness and pitch.
Instructions on refrigerant handling, reclaiming methods, and connecting pipes before charging the system.
Steps for planning the installation, including checking equipment, determining location, and routing lines.
Electrical data including voltage, fan FLA, minimum ampacity, and maximum fuse ratings.
Electric heat specifications, including voltage, wattage, amperage, and fuse requirements.
Describes CCP/CHP units and provides detailed instructions for unit mounting preparation and execution.
Electrical data including voltage, fan FLA, minimum ampacity, and maximum fuse ratings.
Guidelines for mounting the CNR unit, emphasizing plumb, level installation and vibration absorption.
Guidance on electrical wiring, NEC compliance, and specific connection points for power and low voltage.
Electrical data including voltage, heat, fan motor specs, and fuse ratings.
Procedure for checking field voltage, breaker size, incoming power, and low volt power supply.
Steps for troubleshooting cooling-only units, checking low volt wires and transformer.
Steps for checking heating operation, including compressor and electric heat engagement.
Troubleshooting for units with electric heat, including control relays and safety limit switches.
Troubleshooting for heat pump units with electric heat, checking low volt wires and reversing valve.
Diagnosing condenser startup problems and causes of indoor unit freeze-up.
General| Brand | EMI |
|---|---|
| Model | WCP/WHP |
| Category | Air Conditioner |
| Language | English |
