14. Click ‘Next’.
15. Click ‘Finish’.
16. The wizard will now save the settings and will close the screen automatically.
*** The connection is lost when WPA2 AES has been enabled in the router and not yet
in the wireless network adapter. When WPA2 AES has also been enabled in the
wireless network adapter, the connection will be repaired.
Write down the network name, the key and the channel:
WPA2 AES
Network name: ____________________________________________________
Key: ____________________________________________________
Channel: ____________________________________________________
6.4 Configuring your wireless router (1)
When configuring the router and its security (paragraph 6.5), we assume you will be
using the device as a wireless router. Make sure your wireless router is connected to
your computer using a UTP network cable.
1. Open your web browser (e.g. Internet Explorer, Opera or Firefox).
2. Type ‘http://192.168.8.1’ in the address bar.
3. Press the ‘Enter’ key or click ‘Go to’.
4. Click ‘Wireless Wizard’.
5. You will now be asked for a ‘Username’ and a ‘Password’. Fill out ‘admin’ in the
‘Username’ field and ‘admin’ in the ‘Password’ field and press the enter key.
6. The wizard appears in a pop-up screen. Click ‘Next’.
7. Choose you country/region and click ‘Next’.
8. Fill out the desired name for your wireless network in the field ‘SSID’. (Use the
‘Check SSID’ option to ensure this name is not already in use.)
9. Click ‘Next’.
10. The router will automatically scan for a suitable wireless channel.
11. As a choice, the most suitable wireless channel will appear on your screen.
12. Select the same channel you have chosen for your signal booster.
13. Click ‘Next’.
14. You will see a brief summary with the settings you have made so far. Click ‘Next’
to continue.
15. Choose ‘WPA2’ and click ‘Next’.
16. Choose ‘AES’ and click ‘Next’.
17. Fill out the same password in the field ‘Network Key’ you have chosen for your
signal booster.
18. Click ‘Next’.
19. Click ‘Finish’.
To Next Page
Loading...
