Need help?Do you have a question about the Emlid REACH RS3 and is the answer not in the manual?
General| Type | GNSS Receiver |
|---|---|
| Frequency Bands | L1, L2, L5 |
| Update Rate | 20 Hz |
| Tilt Compensation | Yes |
| IMU | Yes |
| LoRa Radio Frequency Range | 868 MHz / 915 MHz |
| LoRa Radio Power | 20 dBm |
| LoRa Radio Range | Up to 10 km |
| Cellular Modem | 4G LTE |
| Ingress Protection | IP67 |
| Internal Memory | 8 GB |
| Data Logging | Yes |
| Operating Temperature | -40°C to +65°C |
| Signal Tracking | GPS, GLONASS, Galileo, BeiDou, QZSS |
| Static Vertical Accuracy | 15 mm + 1 ppm |
| Kinematic Horizontal Accuracy | 8 mm + 1 ppm |
| Kinematic Vertical Accuracy | 14 mm + 1 ppm |
| Horizontal Accuracy | 8 mm + 1 ppm |
| Vertical Accuracy | 15 mm + 1 ppm |
| RTK Accuracy (Horizontal) | 8 mm + 1 ppm |
| RTK Accuracy (Vertical) | 15 mm + 1 ppm |
| Communication Interfaces | Bluetooth, Wi-Fi, USB |
| Connectivity | Bluetooth, Wi-Fi, LoRa |
| Power Supply | USB-C |
| Constellations | GPS, GLONASS, Galileo, BeiDou, QZSS |
To Next Page
