Need help?Do you have a question about the Emlid REACH M2 and is the answer not in the manual?
Steps to update the Reach device firmware using the Emlid Flow app.
Configuring Reach to receive RTK corrections via NTRIP.
Explanation of Real-Time Kinematic (RTK) technology.
Explanation of Post-Processed Kinematic (PPK) technology.
Guidelines for placing the base station for RTK/PPK surveys.
Setting up the Reach UAV kit for PPK mapping.
Adding geotags to drone images using Emlid Studio.
Creating maps from drone data using Pix4Dmapper.
Obtaining Reach coordinates on Android via Bluetooth.
Steps to update the Reach device firmware using the Emlid Flow app.
Configuring Reach to receive RTK corrections via NTRIP.
Explanation of Real-Time Kinematic (RTK) technology.
Explanation of Post-Processed Kinematic (PPK) technology.
Guidelines for placing the base station for RTK/PPK surveys.
Setting up the Reach UAV kit for PPK mapping.
Adding geotags to drone images using Emlid Studio.
Creating maps from drone data using Pix4Dmapper.
Obtaining Reach coordinates on Android via Bluetooth.
General| Channels | 184 |
|---|---|
| Update Rate | Up to 10 Hz |
| Positioning Modes | RTK, PPK, Static |
| RTK Horizontal Accuracy | 7 mm + 1 ppm |
| RTK Vertical Accuracy | 14 mm + 1 ppm |
| Static Horizontal Accuracy | 4 mm + 0.5 ppm |
| Static Vertical Accuracy | 8 mm + 1 ppm |
| Data Logging | RINEX |
| Power Consumption | 2.5 W |
| Operating Temperature | -20°C to +65°C |
| GNSS | GPS, GLONASS, BeiDou, Galileo, QZSS |
| Connectivity | Wi-Fi, Bluetooth, USB |
| LoRa Radio | Optional |
| Position Output | NMEA |
| Dimensions | 55 mm x 45 mm x 14 mm |
To Next Page
