• Press the studs together around the bumper bar.
WARNING
• The bumper bar should always be assembled when in use.
• Always check before use that the bumper bar is rmly in place
• Never carry the pram using the bumper bar.
• Attach the hood into the frame
IMPORTANT
• Turn the seat unit and make sure the zip is fastened around the
bar on seat unit
WARNING
• Before you use the pram, check that the seat fabric is secure
and that all the zips are rmly and correctly in place.
• It is important that the seat unit fabric is always tted correctly.
• Never use this product without fully assembling the seat unit
fabrics onto the frame rst
• Attach the hood in place using the zip attached to the seat unit
fabric.
• Thread the arm pads through the harness.
Assembly and use of the seat unit
REMOVAL OF THE SEAT UNIT FABRIC
• Open the zip completely and remove the fabric from the seat.
• if you only want to remove the seat fabric and not the hood, it is
easier if the hood is in the extended position. This is done by
opening the upper zip on top
WARNING
• The hood must always be assembled when the pram is in use.
UK
To Next Page
Loading...
