Emmaljunga nxt90 - Delivery Check

90
NXT 90 v 1.2
Delivery Check
NXT 90
Check that all rivets, screws and nuts are securely fastened.
Check that all press studs and zips on the seat fabrics and the tray/basket are correctly
and securely attached.
Make sure that there are no other visible differences on the chassis, seat fabrics, tray/
basket and wheels.
1. Check that the following items are present in the correct numbers:
2. Check the functions of the chassis/seat unit/carrycot.
3. Wheels and brakes
4. Overall inspection of the product
1 pc Folded chassis
1 pc Tray/Basket
2 pc Swivel wheels
2 pc Wheels
2 pc Axle shafts
1 pc Instruction manual
1 pc Seat unit with seat unit fabrics incl 5-point harness
1 pc Hood - Seat unit
1 pc Apron
1 pc Carrycot
1 pc Hood - carrycot
1 pc Apron for carrycot
1 pc Mattress
Lubricate the ends of the axles.
Attach the wheels and make sure that the wheels lock into position.
Check that the parking device locks both rear wheels when engaged.
UK
Unfold the chassis.
Check the function of the chassis , that the two locking clips lock properly on both sides.
Check that the seat/carrycot click on the chassis and it locks on both sides.
Check the 5 point safety harness on the seat unit by checking that it locks into place.
Check the telescopic height adjustment by lifting/pulling the handle up and down, the
handlebars should be checked that they lock in each position.
Check that the back rest can be adjusted and locked into each position.
Check that the footrest on the seat unit can be adjusted and locked into each position.