The Hood
• Hood covers are easily removable by unzipping the hood and
removing from the frame.
• The hood is attached to the carrycot with velco strips.
• The hood can be folded up and down in the desired position by
pressing both buttons on the inside of the hood.
Assembly and use of the carrycot
ATTACH THE CARRYCOT
• Put on the brake. Lift the carrycot with the handle and place it
onto the frame. Press down so that the carrycot locks into place
you will hear a "click" on both sides.
WARNING
• Always check that the carrycot is properly attached in the locked
position on both sides.
REMOVE THE CARRYCOT
• Put on the brake.
• Under the carrycot base, push in the button and pull the handle
towards you.
• Lift the carrycot upwards.
WARNING
• Always check that the carrycot is properly secured in the locked
position on both sides.
UK
To Next Page
Loading...
