EasyManua.ls Logo

Emmaljunga Quadrolift - Care and maintenance

Emmaljunga Quadrolift
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
55
Manual Quadrolift / Double Duolift v. 3.0
English
Care and maintenance
To maintain the products original fabric colour as long as possible, do not expose the product to excessive
sunlight for long periods of time since the sun affects all fabrics and it can make it fade.
Never store your product in cold and/or damp places.
Always use a rain cover when it is snowing or raining. The product’s fabric is water repellent and cannot
withstand long periods of exposure to rain or snow. You will nd more information in the handbook for your
pram.
Check the following regularly:
That all of the locking devices work correctly
That all of the plastic parts are not damaged or broken.
That all zip fasteners work
That all press studs are properly attached
That all elastic bands are attached and are in good condition
That all carrying straps and the bottom of the product is not damaged or worn.
WARNING!
Get in touch with your authorised Emmaljunga retailer immediately to replace a damaged or worn part
with a new part.
Cleaning Instructions
Remove the bottom plate and the plastic disc.
Use a mild detergent and hand wash the cover (30 degrees) and allow it to drip-dry; do not use a tumble
dryer
Cleaning instructions Leatherette:
Clean with a damp cloth, use only one drop of mild liquid soap, dry in room temperature.
Ironing:
Place a cloth which is made of 100% cotton between the iron and the fabric in order to protect the textile
parts. Use a warm iron, but not too hot. The outer fabric is made of polyester and nylon.
Ensure that all fabric coverings/parts are dry before you assemble the lift.
You can impregnate (apply scotchguard) the fabrics once again. Always do this before you ret the fabric
parts.
WARNING!
Do not transport your child/children in the lift for at least 24 hours after applying a material protector.
Always check that you have retted the parts correctly in accordance with the instructions in the handbook
after washing or maintenance.

Table of Contents

Related product manuals