10 11
Nota: per una migliorare visualizzazione della temperatura e umidità del dispositivo eseguire
quanto elencato
1 - Disporre di uno strumento (termometro e/o igrometro) professionale,
2 - Posizionarlo nelle vicinanze dello stesso (FEBOS)
3 - Attendere almeno un’ora senza eseguire attività sullo schermo del Febos-crono,
4 - Allineare il valore di temperatura / umidità visualizzato sul FEBOS, variando i valori di
offset della sonda di temperatura e l’offset dell’umidità come sopra esposto.
Note: to improve the measurement of the temperature and humidity of the device, carry out the
steps listed
1 - Have a professional instrument (thermometer and/or hygrometer),
2 - Position it near the same (FEBOS)
3 - Wait at least one hour without performing any activity on the Febos-crono screen,
4 - Align the temperature / humidity value displayed on the FEBOS, by varying
the offset values of the temperature probe and the humidity offset as described above
Fine calibrazione
End of calibration