Need help?Do you have a question about the emmeti FEBOS - CRONO IMX Basic / WiFi and is the answer not in the manual?
General| Brand | emmeti |
|---|---|
| Model | FEBOS - CRONO IMX Basic / WiFi |
| Category | Control Panel |
| Language | English |
Explains the integrated management system for thermal systems and heat pumps.
Introduces FEBOS 4.0 as a modular hardware/software platform for managing heat pumps and room comfort.
User terminal for controlling room temperature and humidity, and setting heat pump parameters.
Describes the WiFi connectivity and remote control capabilities of the FEBOS-CRONO system.
Provides crucial safety instructions and precautions for installation and use.
Lists technical specifications and physical dimensions for the Febos-Crono device.
Details the electrical connection diagram for the FEBOS-CRONO-TBR model.
Illustrates the electrical connection diagram with external relays for FEBOS-CRONO.
Describes the procedures for mounting the FEBOS-CRONO device on the wall.
Guides the user through the WiFi connection process for the Febos-Crono WiFi model.
Explains how to configure the system map for the Modbus network.
Describes the configuration when the MIRAI-SMI 4.0 HP is deselected.
Details how to configure the system with a Febos-Crono Slave.
Explains the behavior when the Centralized Slave mode is selected.
Describes the behavior when the Independent Slave mode is selected.
Guides on associating electrical powers with their respective inputs for accurate measurement.
Details how to set the Heat Pump model and system recipe for correct operation.
Details the procedure for calibrating temperature and humidity sensors.
Guides on verifying the status of Heat Pump inputs and outputs.
Details the procedure for checking the status of the PCB TERMINAL BLOCK outputs.
Explains the functionality and features of the 1.12 DEBUG screen.
Describes the 2.3 ROOM SET - SERVICE screen for room settings.
Details the 1.13 FEBOS ENERGY DEBUG screen for energy information.
Explains the room temperature differential setting for thermostat control.
Details the booster differential setting for automatic boost control.
Describes the room humidity differential setting for humidistat control.
Guides on applying offsets to temperature and humidity probe readings.
Explains the configuration of window and presence contacts for digital inputs.
Introduces the service screens for Heat Pump settings and operation.
Defines climate curves and their limitations for water target temperatures.
Details the frost protection settings for the system.
Explains the settings for the additional heater.
Describes the offset procedure for water temperature probes.
Introduces service screens for configuring Sanitary Hot Water settings.
Explains the meaning of various icons used in the user interface.
Details the functionality to lock and unlock the device screen.
Explains the different access levels available for users.
Guides on accessing and modifying system settings.
Describes how to change the background theme and colors of the interface.
Explains how to change the background theme of the interface.
Guides on how to change the display language of the device.
Details how to change the name associated with the Febos-Crono device.
Explains how to change the date and time settings of the Febos-Crono.
Accesses the information screen for software versions, QR codes, and web app credentials.
Explains how to adjust the brightness of the screensaver.
Guides on connecting the Febos-Crono WiFi model to available networks.
Displays detailed WiFi connection information, including IP address and signal strength.
Allows selection of available WiFi networks and password entry.
Guides on registering and activating access to the emmeti portal via the web application.
Introduces the user-accessible screens for monitoring and controlling the Heat Pump.
Details how to set compressor limitations for noise and electrical absorption.
Displays the status of inputs and outputs for the Heat Pump.
Explains how to set the target temperature for heating water.
Guides on setting the target temperature for cooling water.
Displays information about electrical power consumption and production.
Provides access to the history of system alarms.
Details the alarm history specific to the Heat Pump.
Shows the history of alarms generated by the Febos-Crono system.
Describes the main Home screen providing an overview of the environment.
Details the ROOM SET screen for managing room temperature and humidity.
Explains the daily schedule for room temperature settings, including Comfort and Attenuation.
Details how to set the room humidity and dew point.
Displays the operating status of connected Febos-Crono Slave devices.
Provides a detailed view of the Heat Pump status and operation.
Explains how the HP compressor logic modulates based on various factors.
Describes the floor drying function for cooling rooms.
Details the screen for monitoring and programming Sanitary Hot Water.
Explains the logic behind DHW programming and its interaction with free energy.
Displays flows of electricity, including photovoltaic and residence consumption.
Accesses screens displaying temperature and power graphs, daily or weekly.
Shows a summary table of energy consumption and costs for a selected period.
Provides information on active alarms and their descriptions.
Provides information regarding the WEEE directive for equipment disposal.
To Next Page
