emmeti FEBOS - CRONO IMX Basic / WiFi - 4.2.3 Centralized Slave Mode Operation; 4.2.4 Independent Slave Mode Operation

ENEN
12
4. FIRST START-UP
Operation mode not selectable Operation mode selectable
4.2.3 Centralized Slave
If Centralized Slave is selected, the consents from Thermostat and
Humidistat, in addition to supplying power to the relay outputs
(24Vdc max 20mA), are sent to the Heat Pump, which then comes
into operation.
The operating mode (cooling or heating) cannot be selected as it
must necessarily be the same as the Master's.
4.2.4 Independent Slave
If Independent Slave is selected, the consents from Thermostat
and Humidistat supply power only to the outputs
relay (24Vdc max 20mA). The Heat Pump is not involved, therefore
the operating mode
(cooling or heating) may be different from that of the Master.
SERVICE