ENEN
44
8. GUEST SCREENS
8.4 Screen 5.1 SANITARY HOT WATER
Pressing the icon accesses screen 5.1 SANITARY HOT
WATER, which can be divided into two parts:
1) The The DHW Widget, read-only, where
the DHW status information is displayed:
EcoHotWater
MIRAI SMI
in production
DHW
Additional
heater
Coloured icons if the function is active
Sanitary temperature
Electrical power consumption
2) A setting part
Maintenance temp.
(h24)
Time and temp.
request 1
Time and temp.
request 2
Graphic representation
of the daily DHW programming
8.4.1 DHW programming
DHW programming is based on two daily requests plus a mainte-
nance temperature.
The logic implemented allows the HP to calculate how far in
advance to give DHW consent, with the aim of reaching the set
temperature, at the set time, to meet the two daily requests. In
addition, the maintenance temperature is always guaranteed.
If power is available from the photovoltaic, DHW consent can be
activated even away from the times of the two requests.
This is to take the most advantage of free energy.
GUEST
To Next Page
Loading...
Need help?
General