emmeti XECO-2815QE User Manual

Air Conditioners
Serie:
XECO - XX15E - XX15XE - XX16XE
OUTDOOR UNITS
MANUALE INSTALLAZIONE ED ISTRUZIONI PER L’USOMANUALE INSTALLAZIONE ED ISTRUZIONI PER L’USO
ITIT
INSTALLATION MANUAL AND USING INSTRUCTIONSINSTALLATION MANUAL AND USING INSTRUCTIONS
GBGB
MANUAL INSTALACIÓN E INSTRUCCIONES PARA EL USO MANUAL INSTALACIÓN E INSTRUCCIONES PARA EL USO
ESES
MANUEL D’INSTALLATION ET INSTRUCTIONS D’USAGE MANUEL D’INSTALLATION ET INSTRUCTIONS D’USAGE
FRFR

emmeti XECO-2815QE Specifications

General

Refrigerant	R410A
Type	Split System
Heating Capacity	28000 BTU/h
EER	3.5
COP	3.8
Energy Efficiency Ratio (EER)	3.21 W/W
Coefficient of Performance (COP)	3.8
Power Supply	220-240V, 50Hz

Summary

2. WARNINGS

2.1 Attention and dangers

Highlights critical safety warnings and symbols to prevent hazards and misuse of the appliance.

3. IMPORTANT INFORMATION

3.4 Important information of the refrigerant used

3.5 Part of refrigerant safety table

Presents detailed safety information regarding the refrigerant R410A.

5. UNIT POSITION

5.1 External unit positioning

5.2 Minimum functional distances of the external unit

Specifies required clearances around the external unit for proper airflow and function.

5.3 Distance between the units

6. INSTALLATION OF THE INTERNAL UNIT

6.1 External unit installation

Instructions for installing the outdoor unit, including anti-vibration pads and stability.

6.3 Refrigerating circuit piping

Details the specifications and connection procedures for the refrigerant piping.

6.3.4 Connecting the pipes to the fittings

6.4 Electrical supply

Covers the requirements and procedures for electrical connections to the unit.

6.4.2 Power supply of the units

6.4.4 Connection to the outdoor unit terminal board

Step-by-step guide on connecting cables to the outdoor unit's terminal board.

7. LOAD AND SYSTEM TEST

7.1 Draining and filling the refrigerating circuit with R 410 A

Detailed procedure for draining and filling the refrigerant circuit, including safety precautions.

7.1.1 Procedura di vuoto e carica

Step-by-step vacuuming and charging procedure for the refrigeration circuit.

7.1.2 Precautions when adding refrigerant

Specific precautions to take when adding refrigerant, especially for R410A.

7.2 Test running

Instructions for performing initial start-up tests in cooling and heating modes.

7.3 Refrigerant Recovery

9. MALFUNCTION

10. ELECTRIC SCHEMES

Wiring Diagrams and Legends

11. REFRIGERANT CIRCUITS

Refrigerant Circuit Diagrams

GUARANTEE CERTIFICATE

Guarantee Information