Do you have a question about the emmeti X-REVO-19 E Series and is the answer not in the manual?
Brand | emmeti |
---|---|
Model | X-REVO-19 E Series |
Category | Air Conditioner |
Language | English |
Explains the basic components of the split system air conditioner.
Identifies the main parts of the outdoor unit with numbered labels.
Provides a table to identify specific set or single unit models.
Lists the accessories provided with the outdoor unit.
Lists important safety notices, symbols, and general precautions.
Lists the European standards and regulations the air conditioners comply with.
Explains the IP code ratings for indoor and outdoor units.
Details about the R32 refrigerant, GWP, and handling precautions.
Provides operating temperature ranges for cooling and heating for different models.
Safety data for R32 refrigerant, including first aid and firefighting measures.
Covers exposure controls, physical properties, stability, toxicology, ecology, and disposal.
Instructions for carefully unpacking the unit and checking for damage.
Guidance on safely moving heavy units using a forklift or by hand.
Shows how to handle indoor and outdoor unit packages using pre-cut handles.
General guidelines for selecting suitable locations for indoor and outdoor units.
Specifies the minimum required clearance distances around the outdoor unit.
Provides tables for maximum pipe lengths and height differences between units.
Presents a table with the dimensional data (L1-L8) for outdoor units.
Instructions for installing the outdoor unit, including anti-vibration pads.
Details on how to connect and install the condensation drain pipe.
Specifies pipe sizes and installation guidelines for the refrigeration circuit.
Instructions for insulating pipes and performing correct pipe flaring.
Instructions for connecting the electrical supply and power cables.
Guidance on fixing and protecting pipes and cables.
Diagrams showing electrical connections for single and wall monosplit units.
Wiring diagrams for Dual, Trial, and Quadrial unit configurations.
Procedures for initial test running in cooling and heating modes.
Instructions for draining and filling the refrigeration circuit with R32.
Detailed steps for vacuuming and charging the system.
Important precautions for adding refrigerant, including handling cylinders.
Information regarding the WEEE directive for waste electrical and electronic equipment.
Guidelines for the proper disposal of old air conditioners.
Instructions for disposing of new air conditioner packaging materials.
Information on the proper disposal of batteries, including hazardous metal content.
Explains LED indications on the control board for error codes.
Lists error codes, causes, and solutions when the compressor stops.
Lists anomalies indicated by different LED flashing patterns.
Explains LED indications for error codes on specific outdoor unit models.
Describes LEDs and error code indications for specific models.
Explains error code display on the digital display for these models.
Lists outdoor unit error codes, causes, and solutions.
Lists further outdoor unit error codes, causes, and solutions.
Continues listing outdoor unit error codes, causes, and solutions.
Lists error codes, causes, and solutions for indoor unit faults.
Continues listing indoor unit error codes, causes, and solutions.
Details causes and corrective actions for overload in cooling and heating modes.
Lists error codes for inverter board, causes, and solutions.
Lists error codes for inverter board, causes, and solutions for different models.
Lists remaining error codes for inverter board, causes, and solutions.
Provides the electrical diagram for specific outdoor unit models.
Provides the electrical diagram for other specific outdoor unit models.
Provides the electrical diagram for Dual models.
Provides the electrical diagram for the Trial model.
Provides the electrical diagram for the Quadrial model.
Shows the refrigeration circuit diagram for single unit configurations.
Shows the refrigeration circuit diagram for Dual unit configurations.
Shows the refrigeration circuit diagram for Trial/Quadrial unit configurations.
Outlines the general terms and conditions of the product warranty.
Sections for filling out the guarantee certificate for end-user, distributor, and installer.