Need help?Do you have a question about the EMMLabs DAC2X and is the answer not in the manual?
General| Brand | EMMLabs |
|---|---|
| Model | DAC2X |
| Category | Media Converter |
| Language | English |
Toggles operation between on/power-save mode. Front panel functions inactive in power save.
Indicators for LOCK status and base sample frequency (44.1kHz/48kHz).
Toggles analog output polarity. Inversion is done in the digital domain.
Mutes the audio outputs. Pressing again unmutes them.
Button intended for future use.
Selects various digital input formats: EMM LINK, AES, COAX, TOS, USB, PDAI.
The primary switch and connector for AC power to the unit.
Indicators showing working voltage and product model/serial number.
Details various digital input connectors: EMM Optilink, AES/EBU, COAX, TOSLINK, USB, PDAI.
Describes balanced (XLR) and unbalanced (RCA) analog output connectors and their levels.
Information on wired RS232 communication and USB data port for firmware upgrades.
DAC2X memorizes its setup configuration for later retrieval after powerup.
How to connect digital sources to DAC2X inputs and select them.
Examples of connecting EMM Optilink/AES, and notes on LOCK light behavior.
Turns off DAC2X LEDs except LOCK light when pressed via remote.
Instructions for connecting EMM Labs TSD1/TSDX transports to the DAC2X using EMM Optilink.
Guides on connecting DAC2X via USB, including cable types and driver installation for different OS.
Selecting the DAC2X USB Audio device within applications and choosing the appropriate driver.
Details remote functions for DAC, Input selection, Polarity, and Mute.
Specifies baud rate, bits, stop bits, flow control, and parity for RS232.
Lists commands for controlling the DAC2X via RS232, such as polarity toggle and input selection.
Explains how commands are sent, repeated, and the required timing.
Explains the format and meaning of status bytes sent back from the DAC2X.
Details specific bits in status bytes covering frequency, polarity, and mute status.
To Next Page