55
Operation Guide
c� Fuse
How to change a battery fuse:
• Locate the fuse cover, which is located on the battery.
• Use a cross screwdriver to remove the fuse cover.
• Carefully remove the old fuse from the cover by gently pulling it out.
• Replace the old fuse with a new one of the same amperage rating, typically written on the
side of the old fuse.
• Reinstall the fuse holder cover and test the e-bike to ensure the battery is working properly.
WARNING:
Make sure the bike is power off before you start working on it and always use the correct fuse
rating, using a higher fuse rating than recommended can cause damage to the bike.
!
4. Battery
To Next Page
Loading...
