EMMO E-MINI PRO - Adjusting the Handlebar Height

72
Operation Guide
9. Adjusting the Handlebar Height
• Unlock the handlebar clamp, loosen the tension adjusting nut.
• Adjust the handlebar height to your preferred position and lock the clamp.
• Align the clamp opening with the notch in the handlebar tube and close the clamp lever fully.
• Closing the clamp should require enough pressure that it leaves an imprint in your hand.
TENSION
ADJUSTING
NUT
OPEN
CLOSED
12
11
10
9
8
7
6
5
4
3
2
1
0
12
11
10
9
8
7
6
5
4
3
2
1
0
MINIMUM
INSERTION
WARNING:
There is a MINIMUM HEIGHT marker on the post, you must not adjust the handlebar to a position
higher than that.
!